DeWalt TDKIT12X4 XR 18V 12 Piece Power Tool Kit with 4x 5.0Ah Batteries

DeWalt TDKIT12X4 XR 18V 12 Piece Power Tool Kit with 4x 5.0Ah Batteries

The DeWalt TDKIT12X4 is a 12 Piece XR 18V Kit including DCN692N Brushless Framing Nailer, DCN660N-XJ Brushless 2nd Fix Nailer, DCD796N Combi Drill, DCG412 Grinder, DCF887 Impact Driver, DCS380N Reciprocating Saw, DCS355 Multi Tool, DCS331N Jigsaw, DCS391N Circular Saw, DCH253 SDS, DCP580N Planer, DWV9390 Planer Bag, 5 X 4.0Ah Batteries, DCB115 Charger, 3 X DS300 tough system Boxes, a 24" Large Duffel Heavy Duty Tool Bag, and DCL040 Torch. Offering up to 57% more runtime than standard brushed motors, the DEWALT 18V MAX* XR family of tools features brushless motors. While mechanical carbon brush motors generate friction and heat buildup resulting in lost energy & less runtime, XR brushless motors run cooler and more efficiently enabling longer runtime between charges.

Features & Specification:

DCN692N Brushless Framing Nailer:

• Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
• Cordless design so no hanging leads to deal with
• User can engage contact trip lock-off and prevent accidental dis-charge of fastener
• Two speeds or power levels which optimises the nailer for firing all lengths of nails.
• The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
• Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees celsius and minimal cleaning/service requirements
• Class leading vibration and sound figures, offer fantastic user protection
• Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
• Reversible belt/rafter hook provides increased portability and versatility on the job-site
• Depths can be easily adjusted using the thumb wheel depth adjuster Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
• Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
• Gas free operation offers a significant saving in running costs
• Tool free stall/jam clearance minimises user down time

DCN660N-XJ Brushless 2nd Fix Nailer:

• The new generation of cordless power tool technology means that cordless Lithium-ion battery technology is now able to deliver performance that matches AC (mains) powers or air tools (with a compressor).  This model doesn't therefore require any gas, so no mess, no smell and no additional purchases, just plug in your battery and away you go.
• As its part of the XR range from DeWalt the DCN660 is compatible with all of DeWalt's 18v Li-ion batteries, from 2.0Ah to 5.0Ah.
• With its quick readiness and bump feed function this model can fire up to 4 nails every second and has the ability to fire nails up to 63mm in soft wood or 50mm in hard wood.
• Its designed to avoid any stalls or jams, but if one were to happen there is 2 easy ways to clear them in seconds.. both without the need for additional tools.

DCD796N 18V XR Brushless Combi Drill:

• Brushless Motor Technology for excellent efficiency
• Ultra compact, lightweight design allows use in confined spaces
• Two speed all metal transmission for increased runtime and longer tool life
• Drill Driver and Hammer feature for multiple applications
• 15 position adjustable torque control for consistent screw driving into a variety of materials
• Intelligent trigger design allows for total control of application
• Improved ergonomic design with rubber grip over mould improving users comfort
• Improved air flow to the motor for cooler electronics and incrreased power
• 3 position super bright LED light
• Li-Ion battery packs allows for superior insertion and removal with state of charge indicator
• Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster
• Max Torque (Hard): 70 Nm
• Max Torque (Soft): 27 Nm
• Power Output: 460 Watt
• No Load Speed: 0-550/2000 rpm
• Beats per Minute: 0-9350/34000 bpm
• Chuck Capacity: 1.5-13 mm
• Max. Drilling Capacity [Wood]: 40 mm
• Max. Drilling Capacity [Metal]: 13 mm
• Max. Drilling Capacity [Masonry]: 13 mm
• Length: 174 mm
• Height: 203 mm
• Width: 67 mm
• Sound Pressure: 89 dB(A)
• Sound Pressure Uncertainty: 3 dB(A)
• Sound Power: 100 dB(A)
• Sound Power Uncertainty: 3 dB(A)
• Hand/Arm Vibration - Drilling into metal: <2.5 m/s²
• Uncertainty K 1 (Vibration): 1.5 m/s²
• Hand/Arm Vibration - Hammer drilling into concrete: 11.5 m/s²
• Uncertainty K 2 (Vibration): 1.6 m/s²
• Hand/Arm Vibration - Screw driving without impact: <2.5 m/s²
• Uncertainty K 3 (Vibration): 1.5 m/s²
• Weight: 1.8 kg

DCG412 Grinder:

• Powerful and Highly Efficient PM58 DeWalt fan cooled motor with replaceable brushes, delivers up to 7000 rotations per minute for fast cutting and grinding applications
• Steel cut spiral bevel gears provide highest level of durability and low vibration, increasing user productivity
• Low profile jam pot gear case improves gear durability and ergonomics
• Intelligent trigger & lock-off switch for enhanced work safety and control
• Battery Chemistry: XR Li-Ion
• No Load Speed: 7000 rpm
• Max. Disc Diameter: 125 mm
• Spindle Thread: M14 (22 mm)
• Weight: 2.2 kg
• Length: 400 mm
• Sound Pressure: 87 dB(A)
• Sound Power: 98 dB(A)
• Sound Power Uncertainty: 5 dB(A)
• Hand/Arm Vibration - Grinding: 6.0 m/s² Uncertainty K 1 (Vibration): 1.5 m/s²

DCF887N 18V XR Brushless Impact Driver:

• Fatest generation 18V XR Li-Ion Brushless Impact Driver.
• 3 Mode Impact selector improves user control.
• Improved Brushless motor provides 28% increased torque.
• 135mm Overall length.
• 3 LED ‘Halo‘ ring provides maximum illumination of work piece
• 6.35mm ‘drop and load‘ hex bit holder allows for quick, one handed fitment
• Aluminium front housing provides greater heat dispersion increasing motor life
• Ergonomic handle and rubber overmold reduces vibration and user fatigue
• Voltage: 18 V
• Max Torque: 205Nm
• Power Output:280 Watt
• No Load Speed: 0 - 3250 rpm
• Max. Bolt Diameter: M12
• Bit Holder: 1/4" (6.35mm)
• Length: 135 mm
• Height: 196 mm

DCS380N Reciprocating Saw:

• High performance reciprocating mechanism and lightweight magnesium gear case offer the user optimised power to weight ratio
• Intelligent variable speed trigger, lock-off switch and electronic motor brake for quick controlled cuts and enhanced work safety
• Lever-action keyless blade clamp for quick and easy blade changes
• Pivoting adjustable shoe with open top for high stability and blade visibility during a cut
• Four-position blade clamp allows for flush cutting and increased versatility
• Modular component design for trouble free servicing
• Rubber coated grip to reduce surface vibration and user fatigue
• Improved ergonomic design
• Voltage: 18 V
• Power Output: 560 Watts
• No Load Stroke Rate: 0-2950 spm
• Stroke Length: 28.6 mm
• Length: 425 mm
• Height: 195 mm
• Net Weight: 3.3kg
• Sound Pressure: 87 dB(A)
• Sound Pressure Uncertainty: 3 dB(A)
• Sound Power: 98 dB(A)
• Sound Power Uncertainty: 3 dB(A)
• Hand/Arm Vibration - Cutting boards: 26.0 m/s²
• Hand/Arm Vibration - Cutting wooden beams: 25.5 m/s²
• Uncertainty K 2 (Vibration): 10.6 m/s²
• Hand/Arm Vibration - Cutting Wood
• Uncertainty K 1 (Vibration): 6.3 m/s²

DCS355 Multi Tool:

• DeWalt® brushless motor delivers up to 57% more run time over brushed
• Quick-Change™ accessory system allows blades and attachments to be changed quickly without wrenches
• Dual-Grip™ variable speed trigger gives users ultimate speed and application control
• Bright LED light illuminates dark work surfaces for accurate cutting
• DeWalt Oscillating Tool Guide System allows users to set the depth or height for accurate repeatability
• No Load Speed: 0-20,000/min
• Length: 310mm
• Weight: 1.06kg

DCS331N Jigsaw:

• Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster
• Powerful & Highly efficient DeWalt PM47 fan-cooled motor with replaceable brushes. delivers fast cutting action up to 3000 strokes per minute maximising user productivity
• Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
• Tool-free adjustable shoe with anti-scratch cover bevels 45° in both directions
• Quick and easy patented keyless blade change system
• Voltage: 18V
• Power Output: 400 Watts
• No Load Stroke Rate: 0-3000 spm
• Stroke Length: 26mm
• Bevel Capacity: 45°
• Max. Depth of Cut Wood: 135mm
• Max. Depth of Cut Metal: 10mm

DCS391N Circular Saw:

• Highly efficient PM58 DeWalt fan cooled motor with replaceable brushes that are capable of delivering up to 3700rpm for very fast cutting applications using the 165mm TCT blade.
• Durable tool design on these DCS391N circular saws include cast magnesium base for repeated accurate cuts, an ergonomic handle set with a rubber overmould for increased user comfort and safer use
• Intelligent trigger action and keyless bevel angle and depth of cut adjustment with easy to read scale allow for maximum cordless versatility when using these DeWalt circular saws.
• Ultra thin kerf 165mm 24tooth carbide tipped blade allowing for efficient run time and fast, smooth cut finish allowing 55mm depth of cut
• Voltage: 18v
• Blade Diameter: 165mm
• Bore Diameter: 20mm
• Power Output: 460 Watts
• No Load Speed: 3,700/min
• Bevel Capacity: 50°
• at 90º: 55mm
• at 45º: 42.1mm
• Weight: 3.8 kg
• Length: 360mm
• Height: 240mm

DCH253 SDS:

• Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm
• Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
• Best in class vibration, 6.9m/s² reduces user fatigue and maximises operating periods
• Bright white LED with delay feature improves visibility
• No load speed: 0 to 1200rpm
• Impact energy: 2.1jls
• Blows per minute: 0 to 4500bpm
• Tool holder: SDS-Plus
• Maximum drilling in wood: 26mm
• Maximum drilling in metal: 13mm
• Maximum drilling in concrete: 24mm
• Multi position handle
• Size: l x h x w 300mm x 200mm x 85mm
• Weight: 2.6kg
• Hand/Arm Vibration Drilling: 6.6 m/s²
• Uncertainty K 1 (Vibration): 1.5 m/s²
• Hand/Arm Vibration Chisel: 5.4 m/s²
• Uncertainty K 2 (Vibration): 1.5 m/s²
• Hand/Arm Vibration - Metal: 2.5 m/s²
• Uncertainty K 3 (Vibration): 1.5 m/s²
• Sound Pressure: 86 dB(A)
• Uncertainty K 1 (Sound): 3 dB(A)
• Acoustic Pressure: 97 dB(A)
• Uncertainty K 2 (Sound): 3 dB(A)

DCP580N Planer:

• Brushless Motor - Increased power and runtime
• Lightweight - only 3.1 Kg with battery, weighted towards the front of the trigger to reduce any physical strain during use
• Soft grip handle offers end-users optimum comfort and manoeuvrability during a wide range of applications
• On board blade storage and torx key - for quick and easy blade changes
• 2.0mm Depth of Cut - For large material removal
• Fine indexed, accurate depth adjustment knob allows for maximum precision with 0.1mm increments
• Front and rear shoe milled in situ - For increased accuracy
• Part of the intelligent XR Lithium-Ion Series designed for efficiency and making applications faster
• Air lock port - compatible with DeWalt Airlock dust extraction system or DWV9390-XJ Dust Bag
• Foot lock off - stands the tool above the work surface
• Market leading 9.00mm rebate capacity making it ideal for minor on-site alterations and fixes
• No Load Speed: 15,000 rpm
• Maximum Depth of Cut: 2.0 mm
• Rebating Depth: 9.0 mm
• Planer Width: 82 mm
• Shoe Length: 295 mm
• Drum Diameter: 48 mm
• Weight: 2.5 kg
• Length: 370 mm

DWV9390 Planer Bag:

• Large capacity dust collection bag
• Spring loaded for easy emptying
• Left or right mounting
• Compatible with: DCP580

What is included: 

• 1 X DCN692N Brushless Framing Nailer
• 1 X DCN660N-XJ Brushless 2nd Fix Nailer
• 1 X DCD796N Combi Drill
• 1 X DCG412 Grinder
• 1 X DCF887 Impact Driver
• 1 X DCS380N Reciprocating Saw
• 1 X DCS355 Multi Tool
• 1 X DCS331N Jigsaw
• 1 X DCS391N Circular Saw
• 1 X DCH253 SDS
• 1 X DCP580N Planer
• 1 X DWV9390 Planer Bag
• 1 x DCL040 Torch
• 4 X 5.0Ah Batteries
• 1 X DCB115 Charger
• 3 x DS300 Case
• 1 x DE9883 24" Large Duffel Heavy Duty Tool Bag

Toolden is proud to offer free delivery on all orders to UK Mainland addresses for orders over the value of £50*

Your delivery method is chosen based on the value, weight and size of your total order. Orders will be shipped via Royal Mail, DPD or FedEx. Tracking information and delivery notifications are available directly from the courier.

We aim to dispatch all orders within 2-3 working days, however dispatch times can vary so each product has an estimated dispatch time for a more accurate guidance. We also offer direct delivery from some of our partnered manufacturers.

All UK mainland customers should expect to receive their orders no longer than 5 working days after their order is placed. If your goods have not been received after 6 working days, please email admin@toolden.co.uk and we will investigate further. Please allow extended time for European deliveries.

*Certain heavier/bulkier items might incur additional charges. The additional fee will be clearly stated at the checkout, before placing the order.

Returns

Mistakes happen, we're all human! You may return most new, unopened items within 14 days of delivery for a full refund. We will cover the return shipping costs ONLY if the return is a result of our error and arrange for collection at a time convenient to yourself.

It is advisable to inspect the goods prior to signing for delivery. If you can see any damage whatsoever to the packaging please sign for the goods as damaged. If this is not possible please ensure you sign for the goods unexamined to allow us to take any claims up with our deliver partners if necessary.

All tools come with a manufacturers warranty. Most of our product pages have a link to the warranty procedure for that manufacturer and we encourage you to follow the instructions on these pages which will normally direct you to the manufacturers helpline. This is normally the fastest way of getting your warranty problem resolved.

If your order has been delivered damaged, is unwanted or you've ordered the wrong item:

• Please head to our self service Returns centre.
• If you do not contact us within 14 days of purchase, we will direct you to the manufacturers guidelines.

If your item becomes faulty

Under guidelines set to us by manufacturers, we will advise you of the nearest repiar agent which is free of charge under your manufacturer's warranty - please remember to register your item on the manufacturer's website for the additional 2 years warranty. Please also see our Warranty section on the website for futher information. We do not accept returns of damaged or faulty items regardless of timescale. These will always need to be taken to an authorised repair agent or the manufacturer.

Please note that any items returned that have been altered, modified, defaced or undergone heavy usage may not be eligible for a full refund or replacement.

Please allow a maximum of four days to a week for your refund to process. It is often sooner than this however different banks process these with varying levels of efficiency.

If you need to return an item, please go log-in to your account and go to the 'Completed' section of your account page. This will show all completed orders and from here, you will be able to select the option for return and complete the form.

Please see the Royal Mail shipping restrictions to best select the option for return and complete the form.

If you have any issues with any products received from Toolden, please contact us soon as possible. We will try our best to resolve any issues you have or direct you to the right people.