Makita LXT 18V 8 Piece Cordless Power Tool Kit with 3x 3.0Ah Batteries

Makita LXT 18V 8 Piece Cordless Power Tool Kit with 3x 3.0Ah Batteries

This bespoke Lithium-Ion LXT kit is made up using the popular DLX6017 kit and contains a 13mm 2 Speed LXT DHP482Z Combi Drill, BML185 Torch, DHR202Z SDS Plus LXT Rotary Hammer Drill, DJV180Z Cordless Jigsaw, DSS611Z 165mm LXT Circular Saw, DTD152Z 6.35mm (1/4") LXT Impact Driver, DKP180Z Planer and DGA452Z Grinder. All part of the Makita 18V Lithium-Ion LXT range.

The Li-ion range delivers 430% more working capacity during it's lifetime compared to Ni-Cad and is 40% Lighter than Ni-MH. The Li-ion has minimal depletion of power during use or in storage over it's lifetime. The Slide on battery features Foam Cell technology- firm holding with multi contacts and shock absorbing pack, will not puncture and remains cool even in heavy use. Supplied with a purpose designed heavy duty tool bag to store and protect your tools, 3x 18V 3.0Ah Li-Ion Batteries and a Twin Port 22 minute Multi-Volt Rapid Battery Charger.

Features & Specification:

DML802 Torch:

• Multi-faceted reflector controller the direction and spread of the light
• Metal Hang hook for convenience
• 12 position pivoting flashlight head
• Voltage: 18V
• Battery Type: Li-ion
• Lumens: 160lm

DHP482Z Combi Drill:

• Variable 2-speed, reversible motor
• 21 clutch settings deliver up to 480 in. Lbs. of torque
• All metal gears for more efficient power transmission
• Ultra-compact design (only 7-3/4" long)
• Twin led jobs light with pre-glow and after-glow functions
• Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation
• Soft Application Max Torque (Nm): 36
• Hard Application Max Torque (Nm): 62
• Torque Settings: 21 + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / Twin / Pre-glow & After-glow
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-1900
• No Load Speed (RPM) Med: N/A
• No Load Speed (RPM) Low: 0-600
• Chuck Type: 3-Jaw / Single Sleeve Keyless
• Chuck Capacity (mm): 13
• Screw Capacity: Machine Screw (mm): 6
• Screw Capacity: Wood Screw (mm): 10 x 90
• Drill Capacity: Concrete (mm): 13
• Drill Capacity: Metal (mm): 13
• Drill Capacity: Wood (mm): 38
• Impact Rate (BPM) High: 0-28500
• Impact Rate (BPM) Med: N/A
• Impact Rate (BPM) Low: 0-9000

DHR202Z SDS+ Rotary Hammer Drill:

• 3-Mode Switch for rotation only, hammering with rotation, or hammering only
• Variable speed trigger
• Forward/reverse rotation
• 2x faster drilling with synchronized RPM and BPM for more efficient drilling
• Built-in torque limiter clutch disengages if bit jams when hitting rebar
• Chisel rotates 360° with 40 different positions to get the best working
• More compact design at only 330mm long and weighs only 3.2 kg for less operator fatigue
• Ergonomic shape fits like a glove with even pressure and easy control
• LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
• Electric brake
• Job light
• Rotary hammer action
• Rotary only action
• Shank type: SDS Plus
• Capacity in Concrete: 20mm
• Capacity in Steel: 13mm
• Capacity in Wood: 26mm
• Impacts per minute: 0-4,000ipm
• No load speed: 0-1,100mm
• Overall dimensions: 358mm
• Carbon brush: 441

DJV180Z Jigsaw:

• Lightweight and compact
• Smooth and powerful cutting at the high rotational speed at 2,600 rpm
• Easy to trace cutting line with LED job light
• Rubberised soft grip of ergonomic design
• Double insulated
• Happy start decompressor
• Soft start
• Max Cut in Wood: 135mm
• Max in Steel: 10mm
• Length of Stroke: 26mm
• Strokes per minute: 0-2,600

DKP180Z Planer:

• Planes a width of 82mm (3¼") in a single pass
• Unrivalled for sheer power, size and performance
• Fitted with a comfortable operator handle
• Easy to use adjustable depth settings
• A precision machined aluminum base allows for planing accuracy and the cutter head makes 14000 cuts per minute for fast stock removal
• The lock-on button gives the operator the option of continuous operation
• Left and right handed use due to the buttons on either side of the handle
• Dust extraction port on the side
• Adjustable up to a 2mm depth of cut
• Shoe on the underside stops accidental laying down of planer while blade is still moving
• Rebates to a maximum depth of 9mm
• No load speed: 14000rpm
• Planing width: 82mm
• Planing depth: 2mm
• Maximum rebate depth: 9mm

DGA452Z Grinder:

• Makita built produces 50% faster grinding with an impressive 10,000 RPM
• More compact design at only 12-1/2" long and weighs only 5.6 lbs. for less operator fatigue
• Ergonomic shape fits like a glove with even pressure and easy control
• LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
• Built-in electronic control circuit with L.E.D. warning lights for overload protection
• Slide switch with lock-on
• Powerful angle grinder now free from the restriction of cables and power sockets
• Capable of using wheels or discs for mains grinders
• Easy-to-grip, small circumference motor housing
• Anti-restart function
• Electronic current limiter
• Grinding Wheel: 4-1/2" / 115mm
• Cut-Off Wheel: 4-1/2"
• Wire Cup Brush: 3-1/2" / 115mm
• Sanding Disc: 4-1/2" / 115mm
• No Load RPM: 10,000
• Watt Hours: 54.0
• Battery: 18VDC (3.0Ah)
• Spindle Thread: 5/8" - 11 UNC

DSS611Z Circular Saw:

• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
• Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
• Double safety trigger.
• High comfort grips.
• Removable dust nozzle.
• Depth of Cut @ 90°: 57 mm
• Blade Diameter: 165 mm
• Depth of Cut @ 45º: 40 mm
• Depth of Cut @ 50°: 36 mm
• Bore Diameter: 20 mm
• Noise sound pressure: 91 dB(A)
• Noise sound power: 102 dB(A)
• Noise K factor: 3 dB(A)
• No Load Speed: 3700 rpm
• Vibration K factor: 1.5 m/sec²
• Vibration: Cutting Chipboard: 2.5 m/sec²

DTD152Z Impact Driver:

• Electric Brake
• Variable speed control trigger
• Forward/reverse rotation
• Twin LED job light
• High rotation speed
• One-touch bit installation
• Ergonomically designed soft grip handle
• Lightweight design
• Battery protection circuit
• Belt clip
• Driving Shank: 6.35mm (1/4" Hex)
• Machine Screw: M4-M8
• Standard Bolt: M5-M16
• High Tensile Bolt: M5-M12
• Coarse Thread: 22-125mm
• Impacts per minute: 0-3500 ipm
• No Load Speed: 0-2900 rpm
• Max Tightening Torque: 165Nm
• Sound Pressure: 93 dB(A)
• Sound Power: 104 dB(A)
• Sound K Factor: 3 dB(A)
• Vibration: 10.5 m/s²
• Vibration K Factor: 1.5 m/s²

What is Included:

• 1x Makita DML802 18V Torch
• 1x Makita DHP453Z - 18V LXT Combi drill
• 1x Makita DHR202Z - 18V Rotary hammer SDS+ 20mm
• 1x Makita DJV180Z - 18V LXT Jigsaw
• 1x Makita DSS611Z - 18V LXT Circular saw 165mm
• 1x Makita DTD152Z - 18V LXT Impact driver
• 1x Makita DKP180Z- 18V LXT Planer
• 1x Makita DGA452Z - 18V Grinder
• 3x BL1830 18V 3.0Ah Li-ion battery
• 1x DC18RD Twin Port Rapid Battery Charger
• 1x LXT400 Duffel Bag
• 1x LXT600 Duffel Bag

Toolden is proud to offer free delivery on all orders to UK Mainland addresses for orders over the value of £50*

Your delivery method is chosen based on the value, weight and size of your total order. Orders will be shipped via Royal Mail, DPD or FedEx. Tracking information and delivery notifications are available directly from the courier.

We aim to dispatch all orders within 2-3 working days, however dispatch times can vary so each product has an estimated dispatch time for a more accurate guidance. We also offer direct delivery from some of our partnered manufacturers.

All UK mainland customers should expect to receive their orders no longer than 5 working days after their order is placed. If your goods have not been received after 6 working days, please email admin@toolden.co.uk and we will investigate further. Please allow extended time for European deliveries.

*Certain heavier/bulkier items might incur additional charges. The additional fee will be clearly stated at the checkout, before placing the order.

Returns

Mistakes happen, we're all human! You may return most new, unopened items within 14 days of delivery for a full refund. We will cover the return shipping costs ONLY if the return is a result of our error and arrange for collection at a time convenient to yourself.

It is advisable to inspect the goods prior to signing for delivery. If you can see any damage whatsoever to the packaging please sign for the goods as damaged. If this is not possible please ensure you sign for the goods unexamined to allow us to take any claims up with our deliver partners if necessary.

All tools come with a manufacturers warranty. Most of our product pages have a link to the warranty procedure for that manufacturer and we encourage you to follow the instructions on these pages which will normally direct you to the manufacturers helpline. This is normally the fastest way of getting your warranty problem resolved.

If your order has been delivered damaged, is unwanted or you've ordered the wrong item:

• Please head to our self service Returns centre.
• If you do not contact us within 14 days of purchase, we will direct you to the manufacturers guidelines.

If your item becomes faulty

Under guidelines set to us by manufacturers, we will advise you of the nearest repiar agent which is free of charge under your manufacturer's warranty - please remember to register your item on the manufacturer's website for the additional 2 years warranty. Please also see our Warranty section on the website for futher information. We do not accept returns of damaged or faulty items regardless of timescale. These will always need to be taken to an authorised repair agent or the manufacturer.

Please note that any items returned that have been altered, modified, defaced or undergone heavy usage may not be eligible for a full refund or replacement.

Please allow a maximum of four days to a week for your refund to process. It is often sooner than this however different banks process these with varying levels of efficiency.

If you need to return an item, please go log-in to your account and go to the 'Completed' section of your account page. This will show all completed orders and from here, you will be able to select the option for return and complete the form.

Please see the Royal Mail shipping restrictions to best select the option for return and complete the form.

If you have any issues with any products received from Toolden, please contact us soon as possible. We will try our best to resolve any issues you have or direct you to the right people.