Milwaukee M18 FPP2BD-502P 18V FUEL Cordless Twin Pack with 2x 5.0Ah Batteries

Milwaukee M18 FPP2BD-502P 18V FUEL Cordless Twin Pack with 2x 5.0Ah Batteries

The Milwaukee M18 FPP2BD-502P is a comprehensive 18V FUEL cordless twin pack that includes the powerful M18 FHIWF12 Impact Wrench and the versatile M18 FSAGV115XPDB Angle Grinder. With the inclusion of two 18V 5.0Ah batteries and the M12-18 FC Charger, users can experience prolonged usage without interruption. The entire kit is neatly organized and portable in the PACKOUT Case, providing convenience and ease of transport for professionals on the go.

Features & Specification:

M18 FHIWF12 Impact Wrench

• The M18 FUEL high torque impact wrench delivers 1356 Nm fastening torque in a compact size of 213 mm, which gives more access in tight spaces
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• Mode 4 bolt removal, provides maximum nut-busting of 1898 Nm then shifts to 750 rpm for outstanding control when removing fasteners
• ½″ friction ring reception
• New LED light is 40 percent brighter than previous model
• POWERSTATE brushless motor provides increased efficiency, lasts longer and delivers maximum power
• REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• REDLITHIUM battery pack provides superior pack construction, electronics, and fade-free performance to deliver more run time and more work over pack life
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Flexible battery system: works with all MILWAUKEE M18 batteries
• Article Number: 4933459695
• Battery type: Li-ion (not included)
• Impact rate (ipm): 0-950/0-1750/0-2100/0-2100
• Max. bolt diameter: M33
• Max. torque (Nm): 130/400/1356/1356
• No load speed (rpm): 0-550/0-1400/0-1750/0-1750
• Nut-busting torque (Nm): 1898
• Tool reception: ½″ square
• Voltage (V): 18
• Sound power level measured (dB(A)): 103.1
• Sound power level measured uncertainty (dB(A)): 3
• Sound pressure level (Lpa)(dB(A)): 92.1

M18 FSAGV115XPDB Angle Grinder

• Maximum control for every application - 5-step speed dial ideal for working with stainless steel and aluminum & for rust and paint removal
• Delivering corded performance similar to a 1200 W grinder
• RAPIDSTOP™ for fastest disc brake in less than 2 seconds and best user protection
• Non-lockable safety paddle switch with line-lock-out function to prevent automatic start up
• Anti-vibration side handle for lower vibration
• Integrated FIXTEC™ system for tool-free wheel change
• Slim handle design
• Removable dust screen to prevent debris entrance, prolonging motor life
• 115 mm keyless guard for great cutting capacity and fast guard adjustment without using a key
• Integrates three MILWAUKEE®-exclusive technologies - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite
• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• Anti_Kickback Protection: Yes
• Brake: Yes
• Braking Time (S): < 2
• Cutting Depth (mm): 28
• Disc Diameter (mm): 115
• No Load Speed (RPM): 3500 - 8500
• Soft Start Function: Yes
• Standard Equipment: Quick release safety guard, cutting guard clip, AVS side handle, flange, flange nut, spanner, dust screen
• Supplied in: No kitbox or bag supplied
• Switch Type: Paddle (Deadman) switch
• Type: Paddle (Deadman) switch
• Article Number: 4933478774
• Battery Pack Capacity (Ah): No batteries supplied
• Battery Type: Li-ion
• Charger Included: No charger supplied
• Charger Supplied: No charger supplied
• No. of Batteries Supplied: 0
• Voltage (V): 18
• Weight with Battery Pack (EPTA) (kg): 2.7 (M18 B5)
• Sound Power Level (LWA)(DB(A)): 93.6
• Sound Power Level Uncertainty (DB(A)): 3
• Sound Pressure Level (LPA)(DB(A)): 82.6
• Sound Pressure Level Uncertainty (DB(A)): 3
• Vibration Grinding (m/s²): 4.79
• Vibration Grinding Uncertainty (m/s²): 1.5
• Vibration Sanding (m/s²): 1.36
• Vibration Sanding Uncertainty [m/s²]: 1.5

What is included:

• 1x M18 FHIWF12 Impact Wrench
• 1x M18 FSAGV115XPDB Angle Grinder
• 2x 18v 5.0Ah Batteries
• 1x M12-18 FC Charger
• 1x PACKOUT Case

Toolden is proud to offer free delivery on all orders to UK Mainland addresses for orders over the value of £50*

Your delivery method is chosen based on the value, weight and size of your total order. Orders will be shipped via Royal Mail, DPD or FedEx. Tracking information and delivery notifications are available directly from the courier.

We aim to dispatch all orders within 2-3 working days, however dispatch times can vary so each product has an estimated dispatch time for a more accurate guidance. We also offer direct delivery from some of our partnered manufacturers.

All UK mainland customers should expect to receive their orders no longer than 5 working days after their order is placed. If your goods have not been received after 6 working days, please email admin@toolden.co.uk and we will investigate further. Please allow extended time for European deliveries.

*Certain heavier/bulkier items might incur additional charges. The additional fee will be clearly stated at the checkout, before placing the order.

Returns

Mistakes happen, we're all human! You may return most new, unopened items within 14 days of delivery for a full refund. We will cover the return shipping costs ONLY if the return is a result of our error and arrange for collection at a time convenient to yourself.

It is advisable to inspect the goods prior to signing for delivery. If you can see any damage whatsoever to the packaging please sign for the goods as damaged. If this is not possible please ensure you sign for the goods unexamined to allow us to take any claims up with our deliver partners if necessary.

All tools come with a manufacturers warranty. Most of our product pages have a link to the warranty procedure for that manufacturer and we encourage you to follow the instructions on these pages which will normally direct you to the manufacturers helpline. This is normally the fastest way of getting your warranty problem resolved.

If your order has been delivered damaged, is unwanted or you've ordered the wrong item:

• Please head to our self service Returns centre.
• If you do not contact us within 14 days of purchase, we will direct you to the manufacturers guidelines.

If your item becomes faulty

Under guidelines set to us by manufacturers, we will advise you of the nearest repiar agent which is free of charge under your manufacturer's warranty - please remember to register your item on the manufacturer's website for the additional 2 years warranty. Please also see our Warranty section on the website for futher information. We do not accept returns of damaged or faulty items regardless of timescale. These will always need to be taken to an authorised repair agent or the manufacturer.

Please note that any items returned that have been altered, modified, defaced or undergone heavy usage may not be eligible for a full refund or replacement.

Please allow a maximum of four days to a week for your refund to process. It is often sooner than this however different banks process these with varying levels of efficiency.

If you need to return an item, please go log-in to your account and go to the 'Completed' section of your account page. This will show all completed orders and from here, you will be able to select the option for return and complete the form.

Please see the Royal Mail shipping restrictions to best select the option for return and complete the form.

If you have any issues with any products received from Toolden, please contact us soon as possible. We will try our best to resolve any issues you have or direct you to the right people.