Makita HR3210C 32mm 3-Mode SDS+ Rotary Hammer 850W 240V

Description

Makita HR3210C 32mm 3-Mode SDS+ Rotary Hammer 850W 240V

The HR3210C has a new variable speed control and is fitted with a torque limiter device that instantly disengages the drive should the drill bit or core snag during operation. This action protects both the operator from physical injury and the machine from mechanical and electrical overload.

The HR3200C series models have been developed as successor models of HR3000C, featuring low vibration level and lightweight design. Makita's "Active" dynamic vibration absorber creates a shift of air pressure in crank room and barrel room that actively controls the balancer

HR3210C Features:

• Torque limiter: The drill stops when the bit hits against reinforcements.
• Triple operation mode: Rotary only, hammer only and rotary hammer.
• Soft start
• Constant speed under load
• Built-in job light
• Anti vibration technology

HR3210C Specification:

• Impact energy - 5.0 J
• Max in concrete - 32 mm
• Impacts per minute - 1650 - 3300 ipm
• Input Wattage - 850 w
• Max core diameter (TCT) - 90 mm
• Vibration K factor - 1.5 m/sec²
• Net weight4.9 kg
• No Load Speed - 315 - 630 rpm - 
• Vibration: Drilling - 2.5 m/sec²
• Vibration: Chiselling - 7 m/sec²
• Vibration: Hammer Drilling - 10 m/sec²
• Noise sound pressure - 89 dB(A)
• Noise K factor - 3 dB(A)
• Noise sound power - 100 dB(A)

What is included:

• HR3210C 32mm 3-Mode SDS+ Rotary Hammer 850W 240V
• Side handle
• Depth stop
• Bit grease
• Carry case