Description
Teng TC144D Cantilevel Box Tool Kit (144 Pieces)
A comprehensive selection of tools for service technicians. Supplied in the TC540 cantilever tool box.
TC144D Features:
- A comprehensive selection of tools for service technicians
- Supplied in the TengTools 5 drawer cantilever tool box (TC540)
- Padlock facility and full length piano hinges with turned edges for added safety
TC144D Specification:
- No. of pieces: 144
- Colour: Red
- Width (mm): 570 mm
- Depth (mm): 220 mm
- Height (mm): 340 mm
What is included:
- ½" drive: FRP ratchet, universal joint, 2 x extension bars (2½ and 6”), 3/8” female to ½" male T-bar adaptor, 16 x ½" standard 12-point sockets (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30 and 32mm)
- ¼” drive: FRP ratchet, universal joint, 2 x extension bars (2 and 4”), coupler adaptor, 3/8” female to ¼" male adaptor, 10 x ¼" standard 6-point sockets (4, 5, 5.5, 6, 7, 8, 10, 11, 12 and 13mm), 6 x ¼" deep 6-point sockets (6, 7, 8, 10, 12 and 13mm), 11 x ¼" hex bits (3 x TX (TX10, TX15 and TX20), 2 x hex (5 and 6mm), 2 x Phillips (PH1 and PH2), 2 x PZ (PZ1 and PZ2) and 2 x flat (4 and 5.5mm)
- 10 x screwdrivers (4 x flat (3.5, 4, 5.5 and 6.5mm), 3 x Phillips (PH0, PH1 and PH2) and 2 x PZ (PZ0, PZ1 and PZ2)
- 15 x VDE 1000V insulated combination spanners (5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm)
- 9 piece ball end hex key set (1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm)
- 3 x hex keys (1.5, 2 and 2.5mm)
- 10” adjustable wrench
- 8” combination pliers
- 8” long nose pliers
- 10” water pump pliers
- 6” side cutters
- 8” side cutters
- 10” power grip pliers
- 28 x fully-ground drill bits (4 x 1, 3 x 1.5, 2 x 2, 2.5, 3, 3.3, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 6.8, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm)
- Magnetic lamp
- 3m measuring tape
- Hacksaw with 2 x spare hacksaw blades
- Utility knife
- Centre punch with 6 parallel pin punches (3, 4, 5, 6, 7 and 8mm)
- Soft-face hammer
- Ball-pein hammer
- Tin snips
- TC540 5 cantilever tool box