Makita DLX2214TJ 18V LXT Brushless Combi Drill & Impact Driver Kit with 2x 5.0Ah Batteries

Description

Makita DLX2214TJ 18V LXT Brushless Combi Drill & Impact Driver Kit with 2x 5.0Ah Batteries

The Makita DHP481 is a best in class cordless heavy duty brushless 18V combi drill Supplied with the best possible ergonomic handle for drill-driver applications. The Makita DTD170 cordless impact driver features a high performance 175Nm brushless motor. The user has the option to choose between the two modes: 'A' or 'T' mode. A mode helps to eliminate 'screw cam out' and 'cross threading' by driving at low speed unit screw begins to tighten. When fastening screws in the Assist mode the driver starts slowly in order to stabilize the screw before the trigger is fully depressed. Assist mode is perfect for timber drilling, and Tex mode for metal drilling.

Features & Specification:

DHP481 Combi Drill:

• Forward/reverse rotation.
• Single sleeve key-less chuck allows for easy bit installation/removal by one hand
• Electric brake and Twin LED job light with afterglow
• 2 mechanical gears and battery fuel gauge
• Variable speed control by trigger
• Best possible ergonomic handle for drill-driver applications
• Compact overall length.
• Chuck Capacity - 1.5 - 13mm
• Blows per Minute (Hi) - 0 - 31,500ipm
• Blows per Minute (Lo) - 0 - 8,250ipm
• No Load Speed (Hi) 0 - 2100rpm
• No Load Speed (Lo) 0 - 550rpm
• Voltage - 18v
• Max. in wood - 76mm
• Max. in masonry - 16mm
• Max. in steel - 13mm
• Torque Settings - 21 + drill
• Battery Type - Lithium-ion
• Vibration K factor - 1.5 m/sec²
• Maximum Output - 640w
• Lock Torque - 125Nm
• Max. Fastening Torque (Soft Joint) - 60Nm
• Max. Fastening Torque (Hard Joint) - 115Nm
• Vibration: Impact drilling into concrete - 6.5 m/sec²
• Vibration: Drilling into metal - 2.5 m/sec²
• Weight (with batteries) - 2.7 kg

DTD170 Impact Driver:

• 4 stage impact power selection.
• Twin High Brightness LED light.
• One touch bit installation.
• Ergonomically designed rubberised soft grip.
• Compact At Just 117mm Long and lightweight at just 1.2kg.
• T mode the fastening mode for self drilling screws.
• Drive Shank - 6.35mm (1/4") Hex
• Impact Rate - 1st - 0-3,800ipm
• Impact Rate - 2nd - 0-3,600ipm
• Impact Rate - 3rd - 0-2,600ipm
• Impact Rate - 4th - 0-1,100ipm
• Max Fastening Torque - 175Nm
• Net Weight - 1.5kg with BL1860B
• No Load Speed - 1st - 0-3,600rpm
• No Load Speed - 2nd - 0-3,200rpm
• No Load Speed - 3rd - 0-2,100rpm
• No Load Speed - 4th - 0-1,100rpm
• Coarse Thread - 22-125mm
• High Tensile Bolt - M5-M14
• Machine Screws - M4-M8
• Standard Bolt - M5-M16

What is included: 

• 1 x DHP481 Combi Drill
• 1 x DTD170 Impact Driver
• 2 x BL1850B 5.0AH batteries
• 1 x DC18RC Charger
• 1 x Makpac Type 3