Hyundai DHYC50LE 50mm 2" Electric Start Diesel Chemical Water Pump

DHYC50LE

Authorised Reseller
Authorised Reseller
DHYC50LE DHYC50LE DHYC50LE DHYC50LE DHYC50LE DHYC50LE DHYC50LE DHYC50LE DHYC50LE
£839.99 inc VAT
£699.99 ex. VAT
Credit plans available Find out more
Clearpay logo Klarna logo V12 logo
We aim to dispatch within 3-5 working days.
Free delivery available
Currently out of stock

Description

Hyundai DHYC50LE 50mm 2" Electric Start Diesel Chemical Water Pump

Similar to the petrol version, the HY50C, the DHYC50LE is an electric start, diesel-driven chemical pump. The pump which is made out of plastic is to prevent any corrosion occurring that may damage the machine. This makes this water pump ideal for use with fresh water, but also with salt water, chemicals and liquid fertiliser. It can be used for commercial tasks and the plastic pump helps prevent corrosion, expanding the lifespan and preserves the running life of the entire machine.

The benefit of it being diesel powered as opposed to electric, which a lot of water pumps are, is that it can be used in locations that have limited access or is off-grid. Also, as there is no electricity supply needed, so the risk of electrocution by trailing electrical wires through water or puddles is removed.

Powered by the rugged Hyundai D300 diesel engine, with electric start and it's own 12v self-enclosed battery, which makes this easy starting machine a pleasure to use and a joy to start. Compared to smaller horsepower water pumps or petrol models, a diesel pump typically gets the job done in less time and is more economical to run, using red diesel commonly found on farms or for fishing boats. Covered by Hyundai 1 year warranty.

DHYC50LE Features:

  • Diesel-driven water pump with a 50mm inlet/outlet (2" bore approx.)
  • Tough plastic pump, specifically for pumping corrosive liquids, chemicals, liquid fertilizer or sea water
  • 6hp four stroke diesel electric key start engine
  • Maximum pumping head of 35m and lift of 7m
  • Will pump up to 32,000 litres/hour - 533L/min

DHYC50LE Specifications:

  • Fully Assembled Dimensions L x W x H (mm): 570 x 470 x 670
  • Drive Type: Direct Drive
  • Engine Model Size (cc): 221
  • Engine Model Type: Hyundai D200
  • 4 Stroke single cylinder Fuel Tank (L): 3.6
  • Fuel Type: Diesel
  • Impeller Type: Nylon/Fibreglass
  • Inlet (inches / mm): 2/50
  • Maximum Flow Rate (L/min): 533
  • Maximum Power @ 3000rpm (hp/kw): 3.8/2.8
  • Maximum Power @ 3600rpm (hp/kw): 4.2/3.1
  • Net Installed Power @ 3000rpm (hp/kw): 3.4/2.5
  • Net Installed Power @ 3600rpm (hp/kw): 3.8/2.8
  • Noise Level (dB): 105
  • Oil Capacity (L): 0.6
  • Outlet (inches / mm): 2/50
  • Pump Type: Nylon/Fibreglass
  • Starting System Method: Recoil/Electric
  • Suction Lift (m): 7
  • Total Lift (m): 35
  • Starting System: Remote

What is included:

  • 1x Hyundai DHYC50LE 50mm 2" Electric Start Diesel Chemical Water Pump
Read More

You might also like

Hyundai DHYC50LE 50mm 2" Electric Start Diesel Chemical Water Pump

Similar to the petrol version, the HY50C, the DHYC50LE is an electric start, diesel-driven chemical pump. The pump which is made out of plastic is to prevent any corrosion occurring that may damage the machine. This makes this water pump ideal for use with fresh water, but also with salt water, chemicals and liquid fertiliser. It can be used for commercial tasks and the plastic pump helps prevent corrosion, expanding the lifespan and preserves the running life of the entire machine.

The benefit of it being diesel powered as opposed to electric, which a lot of water pumps are, is that it can be used in locations that have limited access or is off-grid. Also, as there is no electricity supply needed, so the risk of electrocution by trailing electrical wires through water or puddles is removed.

Powered by the rugged Hyundai D300 diesel engine, with electric start and it's own 12v self-enclosed battery, which makes this easy starting machine a pleasure to use and a joy to start. Compared to smaller horsepower water pumps or petrol models, a diesel pump typically gets the job done in less time and is more economical to run, using red diesel commonly found on farms or for fishing boats. Covered by Hyundai 1 year warranty.

DHYC50LE Features:

  • Diesel-driven water pump with a 50mm inlet/outlet (2" bore approx.)
  • Tough plastic pump, specifically for pumping corrosive liquids, chemicals, liquid fertilizer or sea water
  • 6hp four stroke diesel electric key start engine
  • Maximum pumping head of 35m and lift of 7m
  • Will pump up to 32,000 litres/hour - 533L/min

DHYC50LE Specifications:

  • Fully Assembled Dimensions L x W x H (mm): 570 x 470 x 670
  • Drive Type: Direct Drive
  • Engine Model Size (cc): 221
  • Engine Model Type: Hyundai D200
  • 4 Stroke single cylinder Fuel Tank (L): 3.6
  • Fuel Type: Diesel
  • Impeller Type: Nylon/Fibreglass
  • Inlet (inches / mm): 2/50
  • Maximum Flow Rate (L/min): 533
  • Maximum Power @ 3000rpm (hp/kw): 3.8/2.8
  • Maximum Power @ 3600rpm (hp/kw): 4.2/3.1
  • Net Installed Power @ 3000rpm (hp/kw): 3.4/2.5
  • Net Installed Power @ 3600rpm (hp/kw): 3.8/2.8
  • Noise Level (dB): 105
  • Oil Capacity (L): 0.6
  • Outlet (inches / mm): 2/50
  • Pump Type: Nylon/Fibreglass
  • Starting System Method: Recoil/Electric
  • Suction Lift (m): 7
  • Total Lift (m): 35
  • Starting System: Remote

What is included:

  • 1x Hyundai DHYC50LE 50mm 2" Electric Start Diesel Chemical Water Pump

We offer a range of finance options to suit your needs.


Toolden is proud to offer free delivery on all orders to UK Mainland addresses for orders over the value of £50*

Your delivery method is chosen based on the value, weight and size of your total order. Orders will be shipped via Royal Mail, DPD or FedEx. Tracking information and delivery notifications are available directly from the courier.

We aim to dispatch all orders within 2-3 working days, however dispatch times can vary so each product has an estimated dispatch time for a more accurate guidance. We also offer direct delivery from some of our partnered manufacturers.

All UK mainland customers should expect to receive their orders no longer than 5 working days after their order is placed. If your goods have not been received after 6 working days, please email admin@toolden.co.uk and we will investigate further. Please allow extended time for European deliveries.

*Certain heavier/bulkier items might incur additional charges. The additional fee will be clearly stated at the checkout, before placing the order.

Returns

Mistakes happen, we're all human! You may return most new, unopened items within 14 days of delivery for a full refund. We will cover the return shipping costs ONLY if the return is a result of our error and arrange for collection at a time convenient to yourself.

It is advisable to inspect the goods prior to signing for delivery. If you can see any damage whatsoever to the packaging please sign for the goods as damaged. If this is not possible please ensure you sign for the goods unexamined to allow us to take any claims up with our deliver partners if necessary.

All tools come with a manufacturers warranty. Most of our product pages have a link to the warranty procedure for that manufacturer and we encourage you to follow the instructions on these pages which will normally direct you to the manufacturers helpline. This is normally the fastest way of getting your warranty problem resolved.

If your order has been delivered damaged, is unwanted or you've ordered the wrong item:

  • Please head to our self service Returns centre.
  • If you do not contact us within 14 days of purchase, we will direct you to the manufacturers guidelines.

If your item becomes faulty

Under guidelines set to us by manufacturers, we will advise you of the nearest repiar agent which is free of charge under your manufacturer's warranty - please remember to register your item on the manufacturer's website for the additional 2 years warranty. Please also see our Warranty section on the website for futher information. We do not accept returns of damaged or faulty items regardless of timescale. These will always need to be taken to an authorised repair agent or the manufacturer.

Please note that any items returned that have been altered, modified, defaced or undergone heavy usage may not be eligible for a full refund or replacement.

Please allow a maximum of four days to a week for your refund to process. It is often sooner than this however different banks process these with varying levels of efficiency.

If you need to return an item, please go log-in to your account and go to the 'Completed' section of your account page. This will show all completed orders and from here, you will be able to select the option for return and complete the form.

Please see the Royal Mail shipping restrictions to best select the option for return and complete the form.


If you have any issues with any products received from Toolden, please contact us soon as possible. We will try our best to resolve any issues you have or direct you to the right people.

dewalt logo makita logo milwaukee logo Sealey logo Draper Tools Hyundai Tools

Not Right? Try One Of These Instead