Makita DLX13PC1 18V Cordless 13 Piece Kit with 4x 5.0Ah Batteries

Makita DLX13PC1 18V Cordless 13 Piece Kit with 4x 5.0Ah Batteries

The Makita DLX13PC1 is a 13 piece 18V cordless tool kit including 4x 18V 5.0Ah Batteries, Double Charger and a Duffel Bag. 

Features & Specification:

DTD152Z 18V LXT Impact Driver (Body Only)

• Electric Brake
• Battery Capacity Indicator: No
• Variable speed control trigger
• Forward/reverse rotation
• Twin LED job light
• High rotation speed
• One-touch bit installation
• Ergonomically designed soft grip handle
• Compact overall length of 137mm
• Lightweight design
• Battery protection circuit
• Belt clip
• Battery Type: Li-ion
• Voltage: 18V
• Driving Shank: 6.35mm (1/4" Hex)
• Machine Screw: M4-M8
• Standard Bolt: M5-M16
• High Tensile Bolt: M5-M12
• Coarse Thread: 22-125mm
• Impacts per minute: 0-3500 ipm
• No Load Speed: 0-2900 rpm
• Max Tightening Torque: 165Nm
• Net Weight: 1.5 kg
• Sound Pressure: 93 dB(A)
• Sound Power: 104 dB(A)
• Sound K Factor: 3 dB(A)
• Vibration: 10.5 m/s²
• Vibration K Factor: 1.5 m/s²

DHR171Z 18V BL SDS Rotary (Body Only)

• Brushless motor
• One touch sliding chuck for easy bit installation and removal.
• 2-mode operation: Rotary only and Rotary hammer
• Electric brake
• Variable speed control by trigger
• Constant speed control
• Forward/reverse rotation
• LED job light
• Compact and lightweight design
• Vibration absorbing housing.
• Voltage: 18 v
• Capacity in Concrete: 17 mm
• Capacity in Steel: 10 mm
• Capacity in Wood: 13 mm
• Impact energy: 1.2 J
• Shank: SDS PLUS 
• Impacts per Minute: 0 - 4,800 ipm
• Noise sound pressure: 86 dB(A)
• Noise sound power: 97 dB(A)
• Noise K factor: 3 dB(A)
• No Load Speed: 0 - 680 rpm
• Vibration K factor: 1.5 m/sec²
• Vibration: Hammer Drilling: 9.0 m/sec²
• Vibration: Drilling into metal: 2.5 m/sec
• Net weight: 2.8 kg

DHP458Z 18V LXT Combi Drill (Body Only)

• Compact design, only 225mm overall length
• 2 speed gearbox
• High operational efficiency with high torque
• Enhanced dust and drip-proof performance for use in outdoor applications or harsh environments
• Single sleeve Metal keyless chuck allows for easy bit installation/removal by one hand
• Twin LED Job light with pre-glow and afterglow functions
• Electric Brake: Yes
• No Load Speed: 0-2000/400 rpm
• Max Torque S/H: 44 / 88 Nm
• Torque Settings: 21 + drill
• Variable Speed Control Trigger: Yes
• Max. in masonry: 16 mm
• Max. in steel: 13 mm
• Max. in wood: 65 mm
• Fastening machine screw: 6mm
• Blows per Minute: 0-30000/6000 bpm
• Voltage: 18V
• Net weight: 2.3 kg
• Total Shipping Weight: 2kg

DCL180Z 18V Vacuum Cleaner- Blue (Body Only)

• Excellent suction power.
• Ideal for cleaning after work in domestic properly.
• Ideal for vehicle cleaning.
• Body only machine will accept all Makita 18v Li-Ion batteries.
• Body only models are ideal to add to existing kit.
• 22 minute charge time with the air cooled Makstar Optimum Charging System.
• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
• Lithium-ion''s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
• Max air flow: 1.3 m³/min
• Max sealed suction: 3.6 kPa
• Capacity: 0.65 litre
• Net weight: 1.2kg

DJR186Z 18V Reciprocating Saw (Body Only)

• Tool-less blade change.
• Trigger switch with lock-off lever
• Electric brake
• Variable speed
• Ergonomically designed handle
• Newly designed crank mechanism for higher efficiency
• High power
• Battery Type: Lithium-ion
• Body only machine
• Voltage: 18 v
• Capacity in Wood: 255 mm
• Capacity in Mild Steel Pipe: 130 mm
• Strokes per Minute: 0 - 2,800 spm
• Stroke Length: 32 mm
• Noise sound pressure: 84 dB(A)
• Noise sound power: 95 dB(A)
• Noise K factor: 3 dB(A)
• Vibration K factor: 1.5 m/sec²
• Vibration: Cutting Wood: 12.5 m/sec²
• Vibration: Cutting Chipboard: 13.0 m/sec²
• Net weight: 3.8 kg

DSS611Z 18V LXT Circular Saw (Body Only)

• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
• Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
• Double safety trigger.
• High comfort grips.
• Removable dust nozzle.
• Battery Type Lithium-ion
• Body only machine Yes
• Voltage: 18 v
• Depth of Cut @ 90°: 57 mm
• Blade Diameter: 165 mm
• Depth of Cut @ 45º: 40 mm
• Depth of Cut @ 50°: 36 mm
• Bore Diameter: 20 mm
• Noise sound pressure: 91 dB(A)
• Noise sound power: 102 dB(A)
• Noise K factor: 3 dB(A)
• No Load Speed: 3700 rpm
• Vibration K factor: 1.5 m/sec²
• Vibration: Cutting Chipboard: 2.5 m/sec²
• Net weight: 3.3 kg

DTM51Z 18V Multitool (Body Only)

• Tool-less accessory clamp. Lever style lock system allows for quick installation and replacement of accessories,.
• Ergonomically best possible barrel grip, with a perfect circumference size and shape which fits the hand for extra comfortable handling.
• Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been used up (Battery protector will shut off the power.)
• Accessories can be installed at 30º increments, across 360º
• Variable speed control dial.
• Soft start
• Anti-restart function.
• High operating efficiency.
• Voltage: 18v
• Shank: OIS
• Oscillation Angle: 1.6º
• Oscillations per Minute: 6,000 - 20,000
• Maximum Output: 390w
• Vibration K factor: 1.5m/sec²
• Vibration: Sanding: 3.0m/sec²
• Vibration: Scraping: 5.5m/sec²
• Vibration: Plunge Saw Blade: 7.0m/sec²
• Vibration: Sentimental Saw Blade: 4.5m/sec²
• Net weight: 2.2 kg

DRT50Z Brushless Cordless Router (Body Only)

• Brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
• Aluminium housing and base for higher durability and accuracy
• Usable collet sizes: 6 mm, 8 mm (1/4", 3/8")
• 100% compatible with the Makita 18 volt Makstar range of LXT batteries up to 6.0Ah
• Variable speed control dial - 5 speed settings from 10,000 - 30,000 RPM (no load)
• Constant speed control - The speed control function provides the constant rotation speed regardless of load conditions
• Soft start - The soft-start function minimizes start-up shock, and makes the tool start smoothly
• Shaft lock for easy installation and removal of trimmer bit
• Includes dust port for attaching to Makita dust extractors
• Dual LED worklight illuminates the workpiece - controlled by switch
• On / Off button for best control
• Electric brake
• Compatible with RT0700C / RT0701C bases
• Voltage: 18v
• Collet Chuck Capacity: 6 mm, 8 mm / 1/4", 3/8"
• Plunge Capacity (Trimmer Base): 0 - 40mm
• Plunge Capacity (Plunge Base Sold Separately): 0 - 35mm
• No Load Speed: 10,000 - 30,000 rpm
• Overall Length: 226 mm
• Dimensions (LxWxH): 89 x 89 x 225 mm
• Net Weight: 2.1 kg

MR003GZ 12V/14.4V/18V/40V Max XGT, LXT & CXT DAB+ Jobsite Radio

• Capable of receiving both DAB & DAB+ (Digital Audio Broadcast)
• Micro USB port for software upgrade
• Compatible with XGT, LXT and CXT batteries
• AC adaptor jack
• Carry handle with built-in FM antenna
• IP65-rated dust and shower-proof construction
• 2x speaker stereo system
• Runs up to 34 hours with a 40v Max XGT 4.0Ah Li-Ion battery
• Elastomer bumpers and metal pipes protect against rough handling
• AUX-IN jack for connecting to external audio source
• Digital tuner with LCD backlit display
• Illuminated control buttons and dial for improved visibility
• FM Frequency Range: 87.5 - 108 MHz
• DAB/DAB+ Frequency Range: Band III 5A - 13F
• Speaker: 2x 89mm
• Practical Output: 12v Max: 1.7 W x2; 14.4v: 3.0 W x2; 18v: 4.9 W x2; 40v Max: 4.9 W x2
• Net Weight: 4.2 - 5.2 kg

DML186 18V LED Torch (Body Only)

• Bright LED illumination
• Over discharge protection circuit
• Push button on/off switch
• Adjustable hand strap with hook and loop fastener
• 6 High efficiency LED's
• Excellent vibration and impact resistance
• Battery Type: Li-ion
• Voltage: 18 v
• Length: 151 mm
• Width: 81 mm
• Height: 61 mm
• Pack Quantity: 1
• Illumination: 4500 lx

DBO180Z 18V Random Orbit Sander (Body Only)

• Simple to operate electronic push button switch with 3-speed settings
• Connectable to dust extractor
• Compact design with short height and lower centre of gravity for better manoeuvrability
• Orbits per Minute: 7000/9500/11000 opm
• Orbit Diameter: 2.8 mm
• Battery Type: Lithium-ion
• Sanding Stroke per Minute: 14000/19000/22000 spm
• Speed Control: 3 stage push button
• Charging Time: 22 min
• Pad brake: Yes
• Paper Fastening: Hook & Loop
• Pad Size: 123 mm
• Paper Size: 125 mm
• Maximum Output: 190 w
• Voltage: 18v
• Net weight: 1.7 kg

DJV180Z 18v Jigsaw (Body Only)

• Lightweight and compact
• Smooth and powerful cutting at the high rotational speed at 2,600 rpm
• Easy to trace cutting line with LED job light
• Rubberised soft grip of ergonomic design
• Double insulated
• Happy start decompressor
• Soft start
• Max Cut in Wood: 135mm
• Max in Steel: 10mm
• Length of Stroke: 26mm
• Strokes per minute: 0-2,600
• Net Weight: 2.8kg
• Total Shipping Weight: 3kg

DGA452Z 18V 115mm Grinder (Body Only)

• Makita built produces 50% faster grinding with an impressive 10,000 RPM
• More compact design at only 12-1/2" long and weighs only 5.6 lbs. for less operator fatigue
• Ergonomic shape fits like a glove with even pressure and easy control
• LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
• Built-in electronic control circuit with L.E.D. warning lights for overload protection
• Slide switch with lock-on
• Powerful angle grinder now free from the restriction of cables and power sockets
• Capable of using wheels or discs for mains grinders
• Easy-to-grip, small circumference motor housing
• Anti-restart function
• Electronic current limiter
• Grinding Wheel: 4-1/2" / 115mm
• Cut-Off Wheel: 4-1/2"
• Wire Cup Brush: 3-1/2" / 115mm
• Sanding Disc: 4-1/2" / 115mm
• No Load RPM: 10,000
• Watt Hours: 54.0
• Battery: 18VDC (3.0Ah)
• Spindle Thread: 5/8" - 11 UNC
• Overall Length: 12-1/2"
• Net Weight: 5.6 Lbs. / 1.9kg
• Voltage: 18v 

What is included:

• 1x DTD152Z 18V LXT Impact Driver (Body Only)
• 1x DHR171Z 18V BL SDS Rotary (Body Only)
• 1x DHP458Z 18V LXT Combi Drill (Body Only)
• 1x DCL180Z 18V Vacuum Cleaner- Blue (Body Only)
• 1x DJR186Z 18V Reciprocating Saw (Body Only)
• 1x DSS611Z 18V LXT Circular Saw (Body Only)
• 1x DTM51Z 18V Multitool (Body Only)
• 1x DRT50Z Brushless Cordless Router (Body Only)
• 1x MR003GZ 12V/14.4V/18V/40V Max XGT, LXT & CXT DAB+ Digital Jobsite Radio (Body Only)
• 1x DML186 18V LED Torch (Body Only)
• 1x DJV180Z 18v Jigsaw (Body Only)
• 1x DBO180Z 18V Random Orbit Sander (Body Only)
• 1x DGA452Z 18V 115mm Grinder (Body Only)
• 4x BL1850B 18V 5.0Ah Battery
• 1x DC18RD Double Charger
• 2x LXT600 Duffel Bag

Toolden is proud to offer free delivery on all orders to UK Mainland addresses for orders over the value of £50*

Your delivery method is chosen based on the value, weight and size of your total order. Orders will be shipped via Royal Mail, DPD or FedEx. Tracking information and delivery notifications are available directly from the courier.

We aim to dispatch all orders within 2-3 working days, however dispatch times can vary so each product has an estimated dispatch time for a more accurate guidance. We also offer direct delivery from some of our partnered manufacturers.

All UK mainland customers should expect to receive their orders no longer than 5 working days after their order is placed. If your goods have not been received after 6 working days, please email admin@toolden.co.uk and we will investigate further. Please allow extended time for European deliveries.

*Certain heavier/bulkier items might incur additional charges. The additional fee will be clearly stated at the checkout, before placing the order.

Returns

Mistakes happen, we're all human! You may return most new, unopened items within 14 days of delivery for a full refund. We will cover the return shipping costs ONLY if the return is a result of our error and arrange for collection at a time convenient to yourself.

It is advisable to inspect the goods prior to signing for delivery. If you can see any damage whatsoever to the packaging please sign for the goods as damaged. If this is not possible please ensure you sign for the goods unexamined to allow us to take any claims up with our deliver partners if necessary.

All tools come with a manufacturers warranty. Most of our product pages have a link to the warranty procedure for that manufacturer and we encourage you to follow the instructions on these pages which will normally direct you to the manufacturers helpline. This is normally the fastest way of getting your warranty problem resolved.

If your order has been delivered damaged, is unwanted or you've ordered the wrong item:

• Please head to our self service Returns centre.
• If you do not contact us within 14 days of purchase, we will direct you to the manufacturers guidelines.

If your item becomes faulty

Under guidelines set to us by manufacturers, we will advise you of the nearest repiar agent which is free of charge under your manufacturer's warranty - please remember to register your item on the manufacturer's website for the additional 2 years warranty. Please also see our Warranty section on the website for futher information. We do not accept returns of damaged or faulty items regardless of timescale. These will always need to be taken to an authorised repair agent or the manufacturer.

Please note that any items returned that have been altered, modified, defaced or undergone heavy usage may not be eligible for a full refund or replacement.

Please allow a maximum of four days to a week for your refund to process. It is often sooner than this however different banks process these with varying levels of efficiency.

If you need to return an item, please go log-in to your account and go to the 'Completed' section of your account page. This will show all completed orders and from here, you will be able to select the option for return and complete the form.

Please see the Royal Mail shipping restrictions to best select the option for return and complete the form.

If you have any issues with any products received from Toolden, please contact us soon as possible. We will try our best to resolve any issues you have or direct you to the right people.