APR Finance Available
Description
Makita DLX6017M 18V 6 Piece Cordless Power Tool Kit with 3x 4.0Ah Batteries
The Makita DLX6017M comes with 3 x 4 li-ion batteries and a single 22min charger. This excellent value kit consists of the Makita DHR202 SDS-PLUS Rotary Hammer, DHP490Z Combi Drill, DTD157 Impact Driver, DSS611 Circular Saw 165mm, DJV180 Jigsaw, BML185 Torch, 3 x 4.0Ah Li-ion Batteries and a Soft Carry Duffel Bag.
Features and Specification:
DHP490Z 18V LXT Brushless Combi Drill
- Keyless chuck for easy bit installation and removal
- Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
- Built-in LED light with pre-glow and afterglow functions illuminates the work area
- Variable speed trigger allows operator to adjust speed based on materials or application
- eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Battery protection circuit protects against overloading, over-discharging and over-heating
DHR202 18V Rotary SDS hammer
- 22 minute charge time with the air cooled Makstar Optimum Charging System.
- Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
- Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
- Conveniently located push button for forward and reverse.
- High comfort grips.
- LED job light with afterglow.
- One-touch sliding chuck for easy bit changes.
- Triple operation mode: Rotary only, hammer only and rotary hammer.
- Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.
DJV180 18V LXT Jigsaw
- Tool-less blade change.
- 22 minute charge time with the air cooled Makstar Optimum Charging System.
- Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
- Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
- High comfort grips.
- LED job light that creates and easy to trace cutting line.
- Smooth and powerful cutting at the high stroke speed of 2,600spm.
DSS610Z 18V LXT 165mm Circular Saw
- Powerful 360W maximum output, yet still with the extra-lightweight and compact design achieved by using Lithium-ion battery as power unit
- Smooth and powerful cutting at the high rotational speed of 3,700 rpm delivered from enhanced motor
- Rubberised soft grip
- Double safety trigger
- Large lock off lever
- LED Job light with afterglow
- Easy to trace cutting line due to LED job light with afterglow and built-in blow-off nozzle that directs sawdust away from cutting line
- Voltage: 18V
- Depth of Cut @ 90°: 57 mm
- Blade Diameter: 165 mm
- Depth of Cut @ 45º: 40 mm
- Depth of Cut @ 50°: 36 mm
- Bore Diameter: 20 mm
- Noise sound pressure: 91 dB(A)
- Noise sound power: 102 dB(A)
- Noise K factor: 3 dB(A)
- No Load Speed: 3700 rpm
- Vibration K factor: 1.5 m/sec²
- Vibration: Cutting Chipboard: 2.5 m/sec²
- Net weight: 3.2 kg
DML815 LED Torch
- 12 pivoting positions with 0 to 170º swivel range
- 4 LED bulb for maximum illumination
- Lightweight and compact for work in tight spaces
- Accessory strap enables tool suspension for hands-free work
- 54 hours of continuous run-time.
- Continuous runtime: 6.0Ah - 54 hours
- Battery: 18V LXT Lithium-Ion
- Lumens: 160
- Luminous flux: 160lm
- Illuminance at 1m: 3,000lx
- Overall length: 272mm
- Skin weight: 0.3kg
- Voltage: 18V
DTD157Z LXT 18V Brushless Impact Driver
- Compact 18V LXT brushless impact driver delivers high fastening performance in a lightweight body for everyday trade use
- Brushless motor design reduces friction and maintenance while maximising runtime from Makita 18V LXT batteries
- Maximum tightening torque of 140Nm provides reliable power for driving standard and high tensile bolts in demanding applications
- Electronic 2-stage impact power selection lets you choose between hard and soft modes to suit different materials and screw sizes
- Assist mode helps reduce screwbit cam-out and cross-threading, improving control when starting screws
- Variable speed trigger offers precise control from low-speed positioning to high-speed fastening up to 3,000 rpm
- High impact rate up to 4,100 ipm speeds up repetitive screwdriving on site and in the workshop
- ¼" hex driving shank enables quick bit changes and compatibility with a wide range of impact-rated accessories
- Aluminium hammer case and XPT construction enhance durability in tough jobsite conditions
- Integrated LED job light, ergonomic soft grip and belt clip improve visibility, comfort and convenience during extended use
- Voltage: 18V
- Power source: Battery powered
- Motor type: Brushless
- No load speed (high): 0 - 3,000 rpm
- No load speed (low): 0 - 1,300 rpm
- Impacts per minute (high): 0 - 4,100 ipm
- Impacts per minute (low): 0 - 2,000 ipm
- Maximum tightening torque: 140 Nm
- Standard bolt capacity: M5 - M14
- High tensile bolt capacity: M5 - M12
- Machine screw capacity: M4 - M8
- Coarse thread screw capacity: 22 - 90 mm
- Driving shank: ¼" hex
- LED job light: Yes
- Electric brake: Yes
- Impact power selection: Electronic 2-stage
- Assist mode: Yes
- Variable speed control: Trigger
- Rotation: Forward and reverse
- Hammer case material: Aluminium
- Weight: 1.2 kg
- System compatibility: Makita 18V LXT
What is included:
- 1 x DML815 LED Torch
- 1 x DHP490Z 18V LXT Combi Drill
- 1 x DHR202Z LXT SDS + Rotary Hammer
- 1 x DJV180Z LXT Jigsaw
- 1 x DSS610Z LXT 165mm Cordless Circular Saw 18V
- 1 x DTD157Z 18V Brushless Impact Driver
- 1 x DC18RC LXT Single Charger
- 3 x BL1840 18V 4.0Ah Li-ion Batteries
- 1 x 831279-0 Holdall Duffel Tool Bag
