Makita DLX2221ST 18V Brushless Twin Kit with 2x 5.0Ah Batteries

Description

Makita DLX2221ST 18V Brushless Twin Kit with 2x 5.0Ah Batteries

The Makita DLX2221ST is a convenient 18-volt cordless twin set comprising two compact tools: the DHP483 Combi Drill with 20 clutch settings capable of delivering up to 40 Nm of torque, designed for light drilling and screw work, and the DTD155 Impact Driver with electronic 2-speed impact power selection, based on the 18-volt version of the CXT TD111D. This 2-piece kit comes complete with 2x 5.0Ah Batteries, a DC18SD Charger, and a handy Carry Case.

Features & Specification:

DHP483 Combi Drill

• Variable 2-speed, reversible, brushless motor
• Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand
• Incorporates Makita's new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
• Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
• 20 clutch settings deliver up to 40 Nm of torque
• All metal gears for more efficient power transmission
• Ultra-compact design (only 176mm long)
• Twin led jobs light with pre-glow and after-glow functions
• Ergonomically designed high comfort grip
• Specially developed for light drilling / screw work
• Voltage: 18v
• Soft Application Max Torque (Nm): 23
• Hard Application Max Torque (Nm): 40
• Torque Settings: 20 + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / Twin / Pre-glow
• Battery Capacity Indicator: No
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-1,700
• No Load Speed (RPM) Med: N/A
• No Load Speed (RPM) Low: 0-500
• Chuck Type: 3-Jaw / Single Sleeve Keyless
• Chuck Capacity (mm): 1.5 - 13
• Screw Capacity: Machine Screw (mm): 6
• Screw Capacity: Wood Screw (mm): 6 x 75
• Drill Capacity: Concrete (mm): 13
• Drill Capacity: Metal (mm): 13
• Drill Capacity: Wood (mm): 36
• Impact Rate (BPM) High: 0-25500
• Impact Rate (BPM) Med: N/A
• Impact Rate (BPM) Low: 0-7500
• Overall Length (mm): 176
• Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.3
• Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.6
• Brushless Motor: Yes
• Sound Pressure Level (LpA): 83 dB (A)
• Sound Power Level (LWA): 94 dB (A)
• Sound Uncertainty (K): 3 dB (A)
• Vibration Percussion Drilling: 10.0 m/s²
• Vibration Rotary Drilling: 2.5 m/s²
• Vibration K factor: 1.5 m/s²

DTD155 Impact Driver

• Brushless motor
• Electronic 2-speed Impact Power Selection
• Electric brake
• Variable speed control by trigger
• Forward / reverse rotation
• LED job light
• Ergonomically designed high comfort grip.
• Slim motor housing
• Voltage: 18 v
• Standard Bolt: M5-M14
• High Tensile Bolt: M5-M12
• Coarse thread (length): 22 - 90 mm
• Max Fastening Torque: 140 Nm
• Battery Type: Lithium-ion LXT 18V (not included)
• Vibration: Fastening Bolt: 14.0 m/sec²
• Vibration K factor: 1.5 m/sec²
• Noise sound pressure: 94 dB(A)
• Noise sound power: 105 dB(A)
• Noise K factor: 3 dB(A)
• Body only machine
• Net weight: 1.2 - 1.5 kg
• Impact Selection: 2 Stage + Assist mode
• Driving Shank: 6.35mm (1/4") Hex
• Blows per Minute (Hi): ipm - 0 - 3900 ipm
• Blows per Minute (Lo): ipm - 0 - 1600 ipm
• Machine Screw: M4-M8
• No Load Speed (Hi): 0 - 3000 rpm
• No Load Speed (Lo): 0 - 1300 rpm

What is included:

• 1x DHP483 Combi Drill
• 1x DHP483 Belt Clip
• 1x DTD155 Impact Driver
• 1x DTD155 Belt Clip
• 2x BL1850B 18V 5.0Ah Batteries
• 1x DC18SD Charger
• 1x Carry Case