Product Description

Makita DHR242 SDS+ Brushless Rotary Hammer with 1x 5.0Ah Battery, 17 Piece SDS+ Bit Set, 2x Makpac Cases & a Makpac Insert

Brand new Makita kit, including DHR242 SDS+ Brushless Rotary Hammer, Makpac Insert With Coloured Compartments, 17 Piece SDS+ Bit Set in a Makpac Type 1 Case, 18V 5.0Ah Battery and DC18RC Charger. Supplied in two Makpac cases for easy storage and transportation.

Features & Specification: 

DHR242 SDS+ Brushless Rotary Hammer:

• Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
• One touch slide chuck for SDS-plus bit
• Easy-to-grip handle
• Ergonomically designed to give maximum power thrust
• Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
• The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
• Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges
• Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact
• Max in Steel: 13mm
• Max in Wood: 27mm
• Max in Concrete: 24mm
• No Load Speed: 0-950rpm
• Blows per minute: 0-4,700bpm
• Single impact energy: 2.0J
• Vibration: 15/sec2
• Charging Time: Approx 22 min
• Net Weight: 3.3kg
• Total Shipping Weight: 8kg

821550-0 Type 2 Makpac Case: 

• Stackable for storage and easy transportation
• Different sizes to choose from
• Strong and collaspible handles
• Weight: 1.6kg
• Length: 396 mm
• Height: 157 mm
• Width: 296 mm

821551-8 Type 3 Makpac Case: 

• Stackable for storage and easy transportation
• Different sizes to choose from
• Strong and collaspible handles
• Weight: 1.9kg
• Length: 396 mm
• Height: 210 mm
• Width: 296 mm

P-83652 Makpac Insert With Coloured Compartments: 

• 1 x Green (L 150mm x H 70mm x W 95mm)
• 2 x Blue (L 95mm x H 70mm x W 95mm)
• 7 x Yellow (L 100mm x H 70mm x W 50mm)
• 1 x Orange (L 240mm x H 70mm x W 45mm)
• 2 x Red (L 50mm x H 70mm x W 50mm)

B-52059 SDS+ Chisel & Drill Bit Set 17pcs: 

• 1x SDS+ Plus 5.0mm x 110mm Drill Bit
• 1x SDS+ Plus 5.5mm x 110mm Drill Bit
• 1x SDS+ Plus 6.0mm x 110mm Drill Bit
• 1x SDS+ Plus 6.0mm x 160mm Drill Bit
• 1x SDS+ Plus 7.0mm x 160mm Drill Bit
• 1x SDS+ Plus 8.0mm x 110mm Drill Bit
• 1x SDS+ Plus 8.0mm x 160mm Drill Bit
• 1x SDS+ Plus 8.0mm x 210mm Drill Bit
• 1x SDS+ Plus 10.0mm x 110mm Drill Bit
• 1x SDS+ Plus 10.0mm x 160mm Drill Bit
• 1x SDS+ Plus 10.0mm x 210mm Drill Bit
• 1x SDS+ Plus 14.0mm x 260mm Drill Bit
• 1x SDS+ Plus 20.0mm x 140mm Cold Chisel
• 1x SDS+ Plus 20.0mm x 250mm Cold Chisel
• 1x SDS+ Plus 40.0mm x 250mm Scaling Chisel
• 1x SDS+ Plus 140mm Bull Point Chisel
• 1x SDS+ Plus 260mm Bull Point Chisel
• 2x MAKPAC Inlay Trays
• 1x MAKPAC Connector Case Type 1

What is included:

• 1x DHR242 SDS+ Brushless Rotary Hammer
• 1x 821550-0 Type 2 Makpac Case
• 1x 821551-8 Type 3 Makpac Case
• 1x P-83652 Makpac Insert With Coloured Compartments
• 1x B-52059 SDS+ Chisel & Drill Bit Set 17pcs in a Makpac Type 1 Case  
• 1x BL1850 18V 5.0Ah Battery
• 1x DC18RC Charger