Makita DTM51ZJX7 18V LXT Multi-Tool with 24 Accessories

Description

Makita DTM51ZJX7 18V LXT Multi-Tool with 24 Accessories

With up to 20,000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles and can flush cut nails and metal pipework. Change the blade for the sanding plate and you can sand or polish with it too. Compatible with all OIS Accessories (Oscillating Interface Systems). With a wide variety of accessories available for various applications. Battery and Charger are not included.

DTM51ZJX7 Features:

• Tool-less accessory clamp for quick installation and replacement
• 12 angle setting of accessories at every 30°from 0° to 360°
• Variable speed control by dial
• Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been
  used up (Battery protector will shut off the power.)
• Anti-restart function prevents accidental start-up
• Accepts OIS- Makita, Bosch & Fein accessories

DTM51ZJX7 Specifications:

• Oscillations per minute 6,000-20,000rpm
• Oscillation 3.2°
• Overall dimensions 324mm
• Voltage 18V
• Vibration K factor: 1.5 m/sec²
• Vibration: Sanding: 3.0 m/sec²
• Vibration: Scraping: 5.5 m/sec²
• Vibration: Plunge Saw Blade: 7.0 m/sec²
• Vibration: Segmential Saw Blade: 4.5 m/sec²
• Net weight 1.9kg
• Total Shipping Weight: 4kg

What is Included:

• 1 x Makita DTM51Z 18V LXT Multi-Tool
• 1 x Makita 821551-8 Makpac Connector Case Type 3
• 1 x 8376718 Case Inlay
• 1 x 196765-1 Dust extraction Attachment
• 1 x TMA006 Blade for Wood and Metal
• 1 x Sanding Pad
• 5 x Abrasive Paper 60 grit Sandpaper
• 5 x Abrasive Paper 80 grit Sandpaper
• 5 x Abrasive Paper 120 grit Sandpaper
• 5 x Abrasive Paper 180 grit Sandpaper
• 1 x Tool Box