Product Description

Makita HR3210FCT 110v SDS+ Hammer with Light And Quick Change Chuck

The Makita HR3210FCT SDS+ Rotary Hammer Drill with three drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.  It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

HR3210FCT 110v Features

• Torque limiter: The drill stops when the bit hits against reinforcements.
• Triple operation mode: Rotary only, hammer only and rotary hammer.
• Soft start
• Constant speed under load
• Built-in job light
• Anti vibration technology
• With Quick Change Chuck

HR3210FCT 110v Specification

• Max. in concrete 32mm
• Max. TCT core 90mm
• No load speed 315-630rpm
• Blows per minute 1,650-3,300bpm
• Impact energy: 4.9Js
• Vibration RH: 10m/sec2
• HO: 7.5m/sec2
• Wattage 850w
• Net weight: 5.4kg
• With Quick Change Chuck
• Please Note: This drill is 110v therefore it needs to be used with a Power Tool Transformer.

What is included:

• 1 x  Makita HR3210FCT 110v SDS+ Hammer 
• Side handle
• Depth stop
• Bit grease
• Quick change chuck and adaptor
• Carry case

*Please note that 110V machines require a transformer plug and are not suitable for standard 240V UK sockets. Please see our range of 240V products for domestic purposes.