Makita S-MAK32C 3-Mode SDS+ Rotary Hammer 850W 110V

Description

Makita S-MAK32C 110v SDS+ Rotary Hammer

The Makita S-MAK32C is Powered by an 850watt motor and generating 6.4 joules of impact energy and with up to 3,300 blows per minute available, S-MAK32C will punch a 32mm hole into concrete and drive a 90mm CT core cutter with patented Makita, AVT Anti Vibration Technology system uses the pneumatic pressure generated in the hammer piston chamber to move a counter balance in the opposite direction to dampen out the impact vibrations at the steel point. This dramatically reduces machine produced vibrations

Features:

• Powered by an 850watt motor and generating 6.4 joules of impact energy and with up to 3,300 blows per minute available, S-MAK32C will punch a 32mm hole into concrete and drive a 90mm CT core cutter
• 3-function, rotary-only operation for drilling with a no load speed of between 315 and 630rpm
• Rotary action with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and demolition work
• Variable speed control
• Torque limiter device that instantly disengages the drive should the drill bit or core snag during operation protecting both the operator from physical injury and the machine from mechanical and electrical overload
• The patented Makita, AVT Anti Vibration Technology system uses the pneumatic pressure generated in the hammer piston chamber to move a counter balance in the opposite direction to dampen out the impact vibrations at the steel point. This dramatically reduces machine produced vibrations
• In addition, 2-Mass fulcrum hinged rear grip handle and the vibration damping side handle to further limit HAV risks

Specification:

• Input Wattage: 850W
• 850 Watt Motor
• SDS+ Fitting
• Rotary/Rotary Hammer/Chiselling Action
• Variable Speed
• Reverse Action
• 5 Joules Impact Energy
• 1650-3300 BPM
• Drilling Capacity 32mm (Concrete)
  Max TCT core 90mm
  
• No Load Speed 315-630rpm
• Weight 5.2kg

In the Box:

        Side handle depth stop,bit grease,carry case

*Please note that 110V machines require a transformer plug and are not suitable for standard 240V UK sockets. Please see our range of 240V products for domestic purposes.