Product Description

Evolution RAGE5-S 255mm TCT Multipurpose Table Saw 1600W 110V 

The HTC Evolution RAGE5-S 255mm TCT Multipurpose Table Saw cuts through a variety of materials including plastic, mild steel, non-ferrous metals, wood and even wood with embedded nails, all with a single blade. Meaning your are never required to change blades, for faster work and less downtime. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish.

With a fully adjustable blade, with a rise and fall (0-80mm) and the tilt capacity (45° to the left hand), for great cutting versatility and a sliding carriage system is available to the left-hand side. The mitre gauge with an adjustable face-plate incorporates quick-access positive angle stops from -60˚ to +60˚. Multifunction, versatile table-top with integral quick-deploy table extensions to the right and left-hand sides.

RAGE5-S Features:

• Multi-Material cutting technology. One saw, one blade, cuts all.*
• Accurate rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide.
• Reliable smooth square cutting every time in a variety of materials.
• Powerful hi-torque motor with an optimised gearbox & blade system.
• 0- 45-degree bevel tilt and 60 - 60-degree mitre fence covers all common, compound cutting angles.
• 83mm depth of cut at 90 degrees and 58mm depth of cut at 45 degrees.
• Integrated dust port above and below the blade captures dust effectively when fitted to an extraction unit/vacuum (sold separately).
• Collapsible frame with wheels for easy storage and portability.
• Left and right table extensions support wide work-pieces with a table surface area of 1200mm x 640mm when fully extended.
• 1.5m durable cable with the built-in storage cable holder.
• Push Stick included for safer operation when handling smaller offcuts.
• 3 Year limited warranty.
• Japanese Tungsten-Carbide-Tipped (TCT) 255mm blade included.

RAGE5-S Specification: 

• Motor (240V 50Hz): 1500W
• Motor (110V 50Hz): 1600W
• Speed No Load: 2500rpm
• Max. Bevel (Left): 45°
• Blade Diameter: 255mm
• No. of Teeth: 24
• Bore: 25.4mm
• Kerf: 2mm
• Max. Depth of Cut (0°): 83mm
• Max. Depth of Cut (45°): 58mm
• Mild Steel Plate
• (Max. Thickness): 6mm
• Rip Capacity - Right of the blade 605mm
• Rip Capacity - Left of the blade 305mm
• Riving Knife Thickness 1.8mm
• Product Dimensions: (With Leg Assembly) 1050mm x 750mm x 940mm
• Product Dimensions: (Without Leg Assembly) 880 x 730 x 330mm
• Max. Table Dimensions 1200mm x 640mm
• Min. Table Dimensions 745mm x 640mm
• Packaging Dimensions: 910mm x 370mm x 750mm
• Product Weight: 28.5 kg
• Packaged Weight: 33.5 kg
• Sound Pressure Level LPA: 93,2dB(A)K:3dB(A)
• Sound Power Level LWA: 106,2dB(A) K=3 dB(A)

RAGE5-S Areas of use: 

• Wood: Hardwood & tanalised decking, MDF laminates, mouldings, reclaimed wood with nails, scaffold boards & poles, stud-work.
• Ferrous Metal: Mild Steel, angled, box section, square tube, metal stud dry walling, rebar, RSJs, plate (1/4 inch), unistrut.
• Non-Ferrous Metal: Aluminium, armoured cables, cable tray, copper, floor edgings, roof flashings, stair nosings.
• Plastic: Electrical conduit, plastic pipes, plexiglas, rubber & reinforced hoses, (WPC) Wood Plastic Composites.
• Not Recommended: Hardened high carbon, coated and stainless steel. Note: Cutting galvanised steel may reduce blade life.

What is included:

• 1 x RAGE5-S 1600W 110V 255mm TCT Multipurpose Table Saw