Product Description
Spit Pulsa 565916 Double Cable Bow (25 Pack)
The Spit Pulsa 565916 Double Cable Bow (25 Pack) is a specialist cable clip solution designed for securing low voltage cabling and temporary lighting within the Screws, Nails & Fixings > Fixing & Fasteners > Clips > Cable Clips category. Engineered for use with Spit Pulsa gas nailing tools, it replaces the need for traditional cable trays by providing a fast, direct fixing method to concrete, brick, block and steel when used with the recommended pins. The double cable bow configuration offers generous clamping capacity, accommodating up to 16 cables 3x1.5, helping electricians and installers organise dense cable runs neatly and efficiently. Manufactured from robust polypropylene copolymer in a neutral grey RAL 7035 colour, it has passed the 650 °C incandescent wire test, with a 960 °C rating on the fire version, supporting use around heated cabling without becoming an ignition source. With an installation temperature range of -5 °C to +35 °C and a working temperature range of -20 °C to +70 °C, the Spit Pulsa 565916 Double Cable Bow (25 Pack) is supplied as a pack of 25 fixings for professional wiring projects.
565916 Features:
- Spit Pulsa 565916 Double Cable Bow (25 Pack) provides fast, reliable fixing for low voltage cabling and temporary lighting in professional installations
- Double cable bow design increases capacity, allowing secure organisation of up to 16 cables 3x1.5 for dense wiring runs
- All-in-one base design makes it easy to add or adjust cables after fixing, helping maximise installation efficiency on site
- Polypropylene copolymer construction offers durable performance while maintaining a lightweight fixing accessory
- Grey RAL 7035 colour blends neatly with typical electrical and construction environments for a clean, professional finish
- Incandescent wire test to 650 °C passed, with 960 °C performance on the fire version, supporting use around heated cabling
- Optimised for use with Spit Pulsa gas nailing tools, delivering rapid, repeatable fixing into suitable substrates
- Suitable for concrete, brick, block and steel substrates when used with the recommended pins, supporting versatile cable routing
- Working temperature range from -20 °C to +70 °C supports dependable performance in varied site conditions
- Supplied in a convenient 25 pack to support larger cabling projects and repeat installations
Specification
| top_feature: | Spit Pulsa 565916 Double Cable Bow (25 Pack) provides fast, reliable fixing for low voltage cabling and temporary lighting in professional installations |
| top_feature: | Double cable bow design increases capacity, allowing secure organisation of up to 16 cables 3x1.5 for dense wiring runs |
| top_feature: | All-in-one base design makes it easy to add or adjust cables after fixing, helping maximise installation efficiency on site |
| top_feature: | Polypropylene copolymer construction offers durable performance while maintaining a lightweight fixing accessory |
| top_feature: | Grey RAL 7035 colour blends neatly with typical electrical and construction environments for a clean, professional finish |
| top_feature: | Incandescent wire test to 650 °C passed, with 960 °C performance on the fire version, supporting use around heated cabling |
| top_feature: | Optimised for use with Spit Pulsa gas nailing tools, delivering rapid, repeatable fixing into suitable substrates |
| top_feature: | Suitable for concrete, brick, block and steel substrates when used with the recommended pins, supporting versatile cable routing |
| FQQ: | What is the Spit Pulsa 565916 Double Cable Bow used for? |
| FAA: | The Spit Pulsa 565916 Double Cable Bow is designed for fastening and managing cables, replacing the need for traditional cable and basket trays. |
| FQQ: | How many cable bows are included in the Spit Pulsa 565916 Double Cable Bow (25 Pack)? |
| FAA: | This product is supplied as a box of 25 double cable bows. |
| FQQ: | How many cables can the Spit Pulsa 565916 Double Cable Bow hold? |
| FAA: | The double cable bow is designed to clamp up to 16 cables in total, with capacity for 8 cables on each side. |
| FQQ: | Can cables be added after the Spit Pulsa 565916 Double Cable Bow has been installed? |
| FAA: | Yes, its all-in-one base design allows you to add cables even after the bow has been fixed in place. |
| FQQ: | What cable size is the Spit Pulsa 565916 Double Cable Bow suitable for? |
| FAA: | It is suitable for cables of approximately 3 x 1.5mm². |
| FQQ: | Which nail guns or nailers is the Spit Pulsa 565916 Double Cable Bow compatible with? |
| FAA: | These cable bows are intended for use with Spit Pulsa gas nailers such as the Pulsa 700E, Pulsa 800E, Pulsa 27E and Pulsa 40E. |
| FQQ: | What material and finish does the Spit Pulsa 565916 Double Cable Bow have? |
| FAA: | The cable bow is made from plastic and typically supplied in a grey finish. |
| FQQ: | How many pieces are in a standard box of Spit Accessories 565916 Cable Clamp Double Plastic? |
| FAA: | The Spit Accessories 565916 double cable clamp is supplied in a box of 25 plastic clamps. |
| FQQ: | Is the Spit Pulsa 565916 Double Cable Bow suitable for cable and conduit management systems? |
| FAA: | Yes, it forms part of the Spit Pulsa cable and conduit management accessories range and is intended for cable bow fixing applications. |
| FQQ: | What is the EAN code for the Spit Pulsa 565916 Double Cable Bow (25 Pack)? |
| FAA: | The EAN code for this product is 3439515659163. |
| Product name: | Spit Pulsa 565916 Double Cable Bow (25 Pack) |
| Brand: | PASLODE |
| Category: | Screws, Nails & Fixings & Fixing & Fasteners & Clips & Cable Clips |
| Reference: | 565916 |
| Type: | Double cable bow for low voltage cabling and temporary lighting |
| Clamping capacity: | 16 cables 3x1.5 |
| Raw material: | Polypropylene copolymer |
| Colour: | Grey, RAL 7035 |
| Burning properties: | Incandescent wire test according to CEI 695-2-1/2, 650 °C passed, 960 °C on fire version |
| Installation temperature: | -5 °C to +35 °C |
| Working temperature: | -20 °C to +70 °C |
| Recommended tool: | P800E |
| Failure load for double cable bows: | 0.16 kN |
| Displacement at failure load for double cable bows: | 16 mm |
| Recommended load for double cable bows: | 0.04 kN |
| Pack size: | 25 |
| Included: | 1x Spit Pulsa 565916 Double Cable Bow pack (25 cable bows) |
| brand-link-xt: | https://www.toolden.co.uk/brands/paslode/spit-pulsa-nail-guns/ |
| brand-name-xt: | https://cdn11.bigcommerce.com/s-hczpll0y/images/stencil/original/image-manager/v2-spit-brand-8.png |
| Country of Origin: | United Kingdom |
Authorised Reseller


