APR Finance Available
Authorised Reseller
Product Description
Spit 057555 HC6 FH P40/P800 Pulsa Pins with Flush Head 15mm + 1 Fuel Cell (500 Pack)
The Spit 057555 HC6 FH P40/P800 Pulsa Pins with Flush Head 15mm + 1 Fuel Cell (500 Pack) are specialist nails designed for fast, direct fixing into hard concrete, prestressed concrete and structural steel within screws, nails & fixings applications. These high performance HC6 gas pins feature a 3mm hardened carbon steel shank and 6.4mm full flat flush head, providing dependable holding strength while sitting neatly behind plasterboard, cable containment and drywall track. A mechanical zinc coating helps protect against internal corrosion, making them well suited to demanding mechanical and electrical installations and drywall framing on site. Supplied in strips of 10, the collation is engineered to fragment on impact so the pin is left flush to the fixed component without plastic residue. This pack contains 500 pins and 1 fuel cell and is compatible with Spit Pulsa P27, P40, P65 and P800 gas nailers for floor, wall and overhead fixing work.
57555 Features:
- High performance HC6 flush head pins deliver reliable fixing into hard concrete, prestressed concrete and structural steel
- Short 15mm shank length provides secure holding power while minimising embedment for drywall track, deflection heads and light brackets
- 3mm hardened carbon steel shank with ?56HRC hardness ensures consistent penetration into tough substrates
- 6.4mm full flat flush head design reduces snagging and sits neatly behind plasterboard and containment runs
- Mechanical zinc coating of approximately 10-20µm offers internal corrosion protection on M&E and drywall installations
- Plastic strip collation fragments on impact to leave the pin flush to the fixed component with no plastic residue
- Supplied in strips of 10 pins for fast, efficient loading in 20 and 50 pin magazines
- Pack of 500 pins with 1 fuel cell optimises productivity for high volume fixing work
- Compatible with Spit Pulsa P27, P40, P65 and P800 gas nailers for versatile use across multiple tools
- Suitable for floor, wall and overhead applications, helping to maximise speed on first fix work compared with drilling and plugging
Specification
| top_feature: | High performance HC6 flush head pins deliver reliable fixing into hard concrete, prestressed concrete and structural steel |
| top_feature: | Short 15mm shank length provides secure holding power while minimising embedment for drywall track, deflection heads and light brackets |
| top_feature: | 3mm hardened carbon steel shank with ?56HRC hardness ensures consistent penetration into tough substrates |
| top_feature: | 6.4mm full flat flush head design reduces snagging and sits neatly behind plasterboard and containment runs |
| top_feature: | Mechanical zinc coating of approximately 10-20µm offers internal corrosion protection on M&E and drywall installations |
| top_feature: | Plastic strip collation fragments on impact to leave the pin flush to the fixed component with no plastic residue |
| top_feature: | Supplied in strips of 10 pins for fast, efficient loading in 20 and 50 pin magazines |
| top_feature: | Pack of 500 pins with 1 fuel cell optimises productivity for high volume fixing work |
| FQQ: | What is included in the Spit 057555 HC6 FH P40/P800 Pulsa Pins pack? |
| FAA: | Each pack contains 500 HC6 flush head pins at 15mm length and one gas fuel cell supplied in collated strips. |
| FQQ: | Which tools are these HC6 15mm flush head pins compatible with? |
| FAA: | The pins are designed for use with Spit Pulsa nailers including Pulsa 27E, 40E/40P/40P+, 65 and 800E/800P tools. |
| FQQ: | What materials are these Spit HC6 flush head pins suitable for fixing into? |
| FAA: | These high performance pins are designed for use in steel, hard concrete and pre-stressed concrete, as well as other hard substrates used in mechanical and electrical installations. |
| FQQ: | What is the length and diameter of the Spit 057555 HC6 flush head pin? |
| FAA: | The fastener length is 15mm with a nominal diameter of 3mm and a head diameter of 6.4mm. |
| FQQ: | How are the HC6 flush head pins collated and how many pins are in each strip? |
| FAA: | The pins are collated on a plastic strip in strips of 10 pins, with collation designed to fragment on impact so the pin sits flush to the fixed component. |
| FQQ: | What is the capacity of the fuel cell supplied with the Spit 057555 HC6 FH pack? |
| FAA: | The fuel cell supplied in the pack has a capacity of approximately 500 shots to match the 500 pins in the box. |
| FQQ: | Are these HC6 flush head pins suitable for indoor use? |
| FAA: | Yes, the pins are specified for indoor applications and classified as Service Class 1. |
| FQQ: | What type of point and surface treatment do the Spit HC6 flush head pins have? |
| FAA: | The pins have a cut point and a stepped shank, with a mechanically zinc-coated and galvanised surface treatment for durability. |
| FQQ: | What typical applications are these Spit HC6 15mm flush head pins used for? |
| FAA: | They are commonly used by plasterboard installers for fixing metal tracks and L-channels, and by electricians and plumbers for fixing cables and conduits to concrete and steel. |
| FQQ: | How does the flush head design of the HC6 pins benefit fixings? |
| FAA: | The collation breaks away when driven so the pin head sits flush with the surface, giving a neat finish and reliable fixing on hard concrete and steel. |
| Product type: | HC6 flush head gas pins for Pulsa tools |
| Model number: | 057555 |
| Pin reference: | HC6-15 FH |
| Brand: | Spit |
| Pack size: | 500 pins |
| Fuel cell supplied: | 1 gas fuel cell |
| Shank length: | 15mm |
| Shank diameter: | 3mm |
| Head diameter: | 6.4mm |
| Head type: | Flush full head flat head |
| Collation type: | Plastic strip flush head collation |
| Nails per strip: | 10 |
| Material: | Hardened carbon steel |
| Hardness: | ?56HRC |
| Finish: | Mechanical zinc coating approximately 10-20µm |
| Base materials: | Concrete C20/25 to C50/60, prefabricated and prestressed concrete, structural steel |
| Compatible tools: | Spit Pulsa 27E, 40E, 40P, 40P Plus, 65, 800E and 800P |
| Characteristic tensile resistance in non-cracked concrete (15mm): | 0.87kN |
| Characteristic shear resistance in non-cracked concrete (15mm): | 0.75kN |
| Recommended tensile working load in non-cracked concrete (15mm): | 0.30kN |
| Recommended shear working load in non-cracked concrete (15mm): | 0.30kN |
| Characteristic tensile resistance in steel (6.5-10mm): | 2.58-3.74kN |
| Characteristic shear resistance in steel: | 3.60kN |
| Recommended tensile working load in steel (6.5-10mm): | 1.03-1.49kN |
| Recommended shear working load in steel: | 1.20kN |
| Included: | 1x Pack of 500 Spit HC6-15 FH flush head gas pins |
| Included: | 1x Gas fuel cell (approximately 500 shots) |
| brand-link-xt: | https://www.toolden.co.uk/brands/paslode/spit-pulsa-nail-guns/ |
| brand-name-xt: | https://cdn11.bigcommerce.com/s-hczpll0y/images/stencil/original/image-manager/v2-spit-brand-8.png |
| Country of Origin: | United Kingdom |
