Product Description

Timco 1050LSH ZYP Loose Bolt Shield Anchor M10 x 50mm (25 Pack)

The Timco 1050LSH is a box of 25 M10x 50mm loose shield anchors. Shield anchors are expansion anchors used in masonry. Their body is segmented into three pieces held together by a split ring, which expands when the fastener is tightened and pulls the expansion cone back into the body of the sleeve. The bolt comes complete with a hexagon head set screw which is 8.8 high tensile. 

1050LSH Features:

• A three segmented expansion anchor used in concrete, brick or stone
• Torque controlled expansion - reduces the risk of blow-outs
• Supplied with 8.8 high tensile bolt

1050LSH Specification:

• Bolt size: M10 x 110mm
• Head size (A/F): 17mm
• Bolt grade: 8.8 High tensile
• Max fixture thickness: 50mm
• Shield length (L): 60mm
• Drill hole diameter (d0): 16mm
• Material: Carbon steel
• Finish: Zinc & yellow plated CR3
• Corrosion Rating (1-5): 1 - Clean, dry & low humidity environments

Use in Concrete ≥25N/mm2: 

• Min drill hole depth: 70mm
• Min embed. depth: 60mm
• Recommended Tensile Load (kN): 2.52
• Max Recommended Load (kg): 252
• Min Centre Spacing: 180mm
• Min Edge Distance: 90mm
• Min Structure Thickness: 120mm
• Recommended Tightening Torque (Nm): 30

What is included:

• 1x Pack of 25 ZYP Loose Bolt Shield Anchor M10 x 50mm